Compressible
Filler Boards for expansion
joints |
| |
Descriptions
:
This is a microcellular,
closed cell, PE foam Board being
manufactured in various grades,
size & shapes to meet various
requirements of construction industry.
Technical Compliance :
Meets Specification of Highway
works As per Vol : I-clause 1015
B.S. 5628 / B.S. Specification
clause No. 2630 and (M.O.S.T.)
IS 1838*.
Advantages :
1) Fuel / Solvent / Water
/ Good Weather Resistant.
2) Excellent movement accomodations.
3) Negligible water absoption
& long life.
Uses
:
As a filler material in expansion
joints & movement joints of
Road, Bridges, Buildings, Tunnels,
Water Retaining Structure etc.
|
| |
| Technical
Data for H-20 / 100-Grade
|
| Density |
: |
100
+ 10 Kg. / M.3 |
| Tensile
strenght |
: |
12
Kg. / sq.cm. |
| Elongation
|
: |
110% |
| Recovery
at 50% compression |
: |
average
97% (As per M.O.S.T. test
procedures) |
| Water
absorption |
: |
0.02%
( negligible) |
| Temperature
range |
: |
-
40 to 1000C |
| Fuel
/ Solvent / Chemical resistance
|
: |
Excellent
(Similar to LDPE) |
| Reaction
/ adhesion to Sealents |
: |
Totally
innert with all type of
sealent. |
| Weathering
conditions |
: |
Passes
Weatherability test. |
| Compression
loading |
: |
Satisfies
B.S. 5628 Code of practice.
|
|
| |
|
|
|
Technical
Specifications
for full range
of our product
: |
| Hardness |
: |
20
+ 5. |
| Density |
: |
100
+ 10 Kg./
M.3 |
| Width
|
: |
6
mm. to 1000 mm. |
| Thickness
in mm |
: |
6/10/12/15/18/20/25/30/35/40/45/50 |
| Length |
: |
1m,
2m, 7.5m, 8.5m,
9.5m. |
| Special
sizes can also
be manufactured
on special orders. |
|
|
| |
In
pursuit of continuous improvement,
the technical contents are subject
to change without any notice. |
|
